New Dewalt Dcs

Dewalt DCKT4T710P3T 18V 10 Piece kit 4 x 5.0Ah Batteries + Charger T-Stak Case


Dewalt DCKT4T710P3T 18V 10 Piece kit 4 x 5.0Ah Batteries + Charger T-Stak Case

Dewalt DCKT4T710P3T 18V 10 Piece kit 4 x 5.0Ah Batteries + Charger T-Stak Case    Dewalt DCKT4T710P3T 18V 10 Piece kit 4 x 5.0Ah Batteries + Charger T-Stak Case

Dewalt DCKT4T710P3T 18V 10 Piece Cordless Kit. Dewalt DCD796 XR Brushless Hammer Drill Driver.

Dewalt 18v DCD796 XR Brushless Compact Hammer Drill Driver has an ultra compact, lightweight design. The 2 speed, all metal transmission, provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Dewalt DCF887 XR Brushless Impact Driver. Dewalt 18v DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Dewalt DCS355 XR Cordless Oscillating Multi-Tool. Dewalt 18v DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. Dewalt DCH273 Brushless XR 3 Mode Hammer. Dewalt 18v DCH273P2 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Dewalt DCG405 Brushless XR Angle Grinder.

The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. Dewalt DCS570 Brushless Circular Saw.

The DEWALT DCS570 XR Brushless Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power on job site cutting tasks and joinery materials. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°.

Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. The DEWALT DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger and lock-off switch for quick controlled cuts and enhanced work safety.

With a 4-position pendulum action that controls the aggressiveness or smoothness of cuts. Powerful and efficient PM58 DeWALT fan cooled motor with replaceable brushes High performance reciprocating mechanism and lightweight gear case provide an ideal power to weight ratio Intelligent variable speed trigger, lock-off switch and electronic motor brake provide extra safety Lever-action key-less blade clamp for quick and easy blade changes Pivoting adjustable shoe with open top for high stability and blade visibility during a cut Four-position blade clamp allows for flush cutting and increased versatility Modular component design for trouble free servicing with rubber coated grip to reduce surface vibration and user fatigue. Brushless Motor - Increased power and runtime Large twin blade drum with TCT blades for high quality surface finish On board blade storage and torx key - for quick and easy blade changes 2.0mm Depth of Cut - For large material removal O. 1mm increment depth adjustment - For fine adjustment Front and rear shoe milled in situ - For increased accuracy Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster Air lock port - compatible with air-lock or dust bag Foot lock off - stands the tool above the work surface. Variable light settings for maximum brightness or extended runtime 250-500 lumen output with broad and even beam pattern Up to 10 hours runtime Nine position articulating lamp head for directional control of light output Extendable hanging hook allows worklight to be suspended during use.

4 x 18V 5.0Ah Li-ion Batteries 1 x 10.8-18V DCB115 XR Li-ion Charger 2 x TSTAK VI Toolboxes 1 x TSTAK II Toolbox 1 x TSTAK Carrier. DCD796 XR Brushless Compact Hammer Drill Driver. Chuck: 13mm Keyless No Load Speed: 0-550/0-2,000/min Impact Rate: 0-9,350/34,000/bpm Max. Torque: 27/70Nm, 15 Settings Capacity: Steel 13mm Masonry 13mm Wood 40mm. DCF887 XR Brushless Impact Driver.

Bit Holder: 6.35mm (1/4in) No Load Speed: 0-1,000/0-2,800/0-3,250/min Impact Rate: 0-1,800/0-2,900/0-3,800/bpm Max. DCS355 XR Cordless Oscillating Multi-Tool. No Load Speed: 0-20,000/min Length: 310mm. DCH273 Brushless XR 3 Mode Hammer.

Modes: Rotary, SDS Hammer, Chisel Only No Load Speed: 0-1,100/min Impact Rate: 0-4,600/bpm with 2.1 joules Capacity: Wood 26mm Metal 13mm Masonry 24mm. DCG405 XR Brushless Angle Grinder. No Load Speed: 9,000/min.

Strokes at No Load: 0-3,200/min. Stroke Length: 26mm Bevel Capacity: 0-45° Capacity: Metal: 10mm, Wood: 135mm. Barcode: 5035048356203 Voltage: 18 Volt Power Output: 560 Watts No Load Stroke Rate: 0-2,950/min Length: 425mm Height: 195mm.

Barcode: 5035048616253 No Load Speed: 15,000 rpm Maximum Depth of Cut: 2.0 mm Rebating Depth: 9.0 mm Planer Width: 82 mm Shoe Length: 295 mm Drum Diameter: 48 mm Length: 370 mm Hand/Arm Vibration. Barcode: 5035048469163 Battery chemistry: XR Li-Ion Voltage: 18 V Bulb Type: LED Light Output: 250-500 lm Protection Class: IP54 Height: 345 mm Length: 95 mm. Images for illustrative purposes only please refer to description and specification for full details of product. Additional charges will be imposed if, weight is more than 1kg. Postcodes Details are Given Below.

HS 1-9, I 1-56, KA27-28, KW1-17, PA20-49, PA62-77, PA60-61, PA78, PH17-26, PH-30-44, PH49-50, ZE1-3, BT1-94, IM1-9, IM99, TR21-25, Isle Of Wight. If, you receive any Parcel from us that contains damaged goods, this should be notified to customer services who will arrange for collection and replacement, within the 24-48 hours period. The item "Dewalt DCKT4T710P3T 18V 10 Piece kit 4 x 5.0Ah Batteries + Charger T-Stak Case" is in sale since Monday, October 5, 2020.

This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "tools4trade" and is located in Milton Keynes. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Bahamas, Colombia, Jamaica, Kuwait, Panama, Philippines, Qatar, Uruguay, Viet nam.
  1. Model: DCKT4T710P3T
  2. Battery Included: Yes
  3. Power Source: Battery
  4. Type: Cordless Kit
  5. Number of Tools: 10
  6. MPN: DCKT4T710P3T
  7. EAN: 8906763735109
  8. Number of Batteries: 4
  9. Battery Technology: Lithium-Ion (Li-Ion)
  10. Brand: DEWALT
  11. Voltage: 18 V

Dewalt DCKT4T710P3T 18V 10 Piece kit 4 x 5.0Ah Batteries + Charger T-Stak Case    Dewalt DCKT4T710P3T 18V 10 Piece kit 4 x 5.0Ah Batteries + Charger T-Stak Case